Fire damage often results with huge loss of property and human life. But in case of warehouses and industries the loss is a different and causes irreparable damage. The harm often comes in the form of damaged equipment, loss of stored data, production obstacles due to the delay in service which turns into huge loss.
In order to ensure protection to humans from such horrible fire accidents while protecting the valuable property, advancements are done in the field of fire protection to come up with an agent that solves the issue.
SIEX came up with one such system called SIEX CO2 fixed extinguishing system. It is designed for the sole purpose of protecting humans and equipment quickly and effectively.
CO2 as an Agent
Be it performance or results, availability or cost, the immense positive factors of CO2, has made it to the top of most used gaseous extinguishing agent. The clean gas leaves no residue, it is non-corrosive and non-conductive.
It has a positive impact on the environment as it is a naturally available gas. It is odourless, colourless and tasteless. It does not mix with any chemicals to leave a negative influence on ozone.
The safety devices that are developed by SIEX like valves, alarms and pneumatic retarder when used along with these CO2 systems, when installed and used properly make it safe for people.
SIEX developed national and international certified adaptable systems and safety devices that helps in safe evacuation.
How does SIEX Fixed extinguishing system work?
As soon as the devices(detectors) detect an unknown source of fire, they pass the signal to alarms and retarders to prepare the people for evacuation.
If the occupancy of the room is confirmed to be empty, the discharge would begin. It can be done automatically and by manual switch.
Additionally, the manual system consists of a non-electric lockout for terminating the process.
The extinguishing agent is distributed homogeneously in all directions. It is designed in such a way that it leaves no gap even at the wiring harnesses or slots without releasing any particles that could damage the equipment present in the room.
SIEX fixed carbon dioxide firefighting equipment in case of Total Flooding
These systems are designed for cases where the room is watertight or for the rooms whose openings are located a certain proportion below the surface.
How does it work?
After detection, the atmospheric air that is present in the room is replaced with CO2 . The amount of gas that is to be released depends on the situation of the accident and condition of the room. All the extinguishing work is done with assured efficiency and no damage to the property.
SIEX proved a leak tightness test service called Door Fan Test to ensure the room with no leaks in these kinds of situation. They determine the losses and causes of leaks.
SIEX extinguishing equipment for Local Applications
These devices provide 100% efficiency and timing with ensured safety.
The discharge of the agent is done within 30 seconds reducing the risk and damage.
It is used in the cases where the openings of the room exceed the limit to use Total Flooding equipment.